ADT® Authorized Dealer Serving Alll Of Orange County
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Orange County Residence

Property owners must protect against various risks like burglary, flooding, and fire. But what about a danger that you aren’t able to see or smell? Carbon monoxide presents unique challenges as you might never realize it’s there. Despite that, using CO detectors can effectively shield your loved ones and property. Find out more about this dangerous gas and where to place carbon monoxide detectors in your Orange County home.

What Is Carbon Monoxide?

Referred to as the silent killer due to its absence of color, odor, or taste, carbon monoxide is a commonly found gas produced by the incomplete combustion of fuels. Any fuel-utilizing appliance like a furnace or fireplace can create carbon monoxide. Although you typically won’t have a problem, issues can crop up when appliances are not frequently serviced or properly vented. These missteps may lead to a build-up of this potentially deadly gas in your residence. Generators and heaters of various types are commonly responsible for CO poisoning.

When exposed to low concentrations of CO, you may experience fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to high amounts may lead to cardiorespiratory failure, and even death.

Suggestions For Where To Place Orange County Carbon Monoxide Detectors

If you don’t use at least one carbon monoxide detector in your interior, get one now. If possible, you ought to use one on each level of your home, including basements. Review these recommendations on where to place carbon monoxide detectors in Orange County:

  • Put them on each floor, particularly in areas where you use fuel-burning appliances, including furnaces, fireplaces, gas dryers, and water heaters.
  • Always have one within 10 feet of bedrooms. If you only have one carbon monoxide detector, this is the place for it.
  • install them approximately 10 to 20 feet from potential CO sources.
  • Avoid installing them immediately above or next to fuel-utilizing appliances, as a small amount of carbon monoxide could be discharged when they start and prompt a false alarm.
  • Secure them to walls approximately five feet off the floor so they may measure air where occupants are breathing it.
  • Avoid using them in dead-air areas and near windows or doors.
  • Install one in areas above attached garages.

Inspect your CO detectors regularly and maintain them in accordance with manufacturer instructions. You will typically need to replace units in six years or less. You should also make sure any fuel-burning appliances are in in proper working order and adequately vented.